Throw this storage cover over your truck camper to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
Features:
Specs:
You're worried about your truck camper getting wet and dirty in storage before your next camping trip. Whether you're storing your camper in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your camper will be protected. When you keep your camper covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your camper in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply PolyPro top panel has moisture-wicking technology that vents condensation away to reduce moisture buildup that can damage your van over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your van. And when the rain stops, the fabric dries quickly in mild sunlight to minimize the development of mold and mildew.
How to Measure Your Truck Camper
To determine if this cover will work for you, measure the overall length of your camper from the front to the rear bumper, making sure you're accounting for any spare tire carriers and ladders on the back. Then measure the overall height from the bottom of the camper to the top. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover onto Your Truck Camper
First unroll the cover and carefully spread it evenly around your camper, making sure you don't pull too hard and tear the fabric. Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your camper to remove any excess slack in the material. Adjust the tension panels on the front and rear of the cover with the cinch straps until the cover fits snugly around the contours of your camper. And then toss the weighted straps underneath your camper to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job. The tension panels will help reduce the stress on the cover while you're tightening the straps.
And if you need to grab supplies, you can use the zippered panel on the back to easily access the interior of your camper without having to completely remove the cover.
Average Customer Rating: 4.3 out of 5 stars (345 Customer Reviews)
Throw this storage cover over your truck camper to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.Its excellent... So far... I just put it on. It went on extremely easily and I did it alone. Instructions say two people, but I found it simple to do myself. I'm also OK with walking on my camper roof. I feels well made. Time will tell if it survives a New England winter.
Very pleased overall. Easy for two people to install, remove and store. We did add a few extra tie down ropes to secure the part protecting the front that overhangs the truck cab. Rig was stored outside and we were concerned wind could blow it off.
The cover is very good but there’s areas on the cover that could be reinforced to be a lot better during a little windstorm during the winter when you have a covered
I have ordered from trailer multiple times and have worked with the customer service line to solve problems, they have always been knowledgeable and helpful.
Great company!
This is a very high quality cover. We are very happy with the fit and the way you can access the camper with the zipper placement. The tie downs are also very good.
Well engineered, & we’ll made.
We purchased this cover last fall to protect our 10' truck camper from the winter elements. It did not hold up well. First, the tie-down straps ripped loose. We jerry-rigged a tie-down system. Then the winds came. This is Colorado (7000'), where 30-50 mph winds are not uncommon. That was all she wrote for this cover. Even though the camper was parked where the wind was blocked from two sides, the cover shredded within about six weeks of heavy wind season. At the end of the winter we could remove the cover in pieces. It went in the trash.
This is our second camper cover and this one far out performs our first cover. The fit is perfect--we have the largest camper they make and there is no problem with the coverage. The zippers and clips are sturdy and are holding up well. Our camper sits under a tree that drops pitch and the cover is doing it's job of protecting the camper.
Thank you for such a great product!
The truck camper cover is very well made and fits great. It is keeping the rain off
so I hope this will preserve the camper. We are in Washington with lots of rain.
Quality is very good so now we need to order a cover for the fishing boat.
Very nice, it is fits our camper perfectly, good straps to keep it in place during bad weather. Received it very quickly!
Fast shipment, great customer service.
Was ok. Fell apart after one Colorado w inter
A year later this product is doing great! Looks and keeps my Truck RV looking clean.
cover has held up very well. SNOW wind and rain
delivered 3 days early.. box says it was sent from kent wa.. too bad i didnt know.. i was within 1 mile of this adress last week, could have picked it up, and saved shipping
Nice cover .. fits great on my lance 10 55
Great experience dealing with etrailer on getting a High quality cover that fits perfect over my tada travel trailer
This cover seems well constructed and fairly easy to put on the trailer. However, it wasn't folded to apply the way the instructions stated. As well, the instructions say to get on top of the trailer, which we aren't able to do. My suggestion is to change the instructions. It took two of us -- we spread out the cover, then on each side walked the cover back and over. Doing it that way wasn't too hard. Suggest putting pool noodle sections on the trailer parts that are pointy and stick out. Glad we got it!
So far so good . I was afraid that this would not fit my popup. I have a Rockwood Highwall the big one. and it fit just fine with little extra room. Just what I needed. Thank you very much.
Well crafted and sturdy. Fit Ram chassis Thor perfectly. The cover was thoughtfully constructed: during storage it’s easy to open for RV access (without having to undo the entire cover); came with throw bag” for use is getting tie straps under the coach; zippers and ties are all secured well. Wish only that there was a note about “front” so my first installation didn’t have to be turned around…
Rather than the convenient webbing and Fastex buckles that were provided on my last cover, Classic Accessories gave me three pieces of cheap, slippery rope for tie downs. It provided the opportunity to practice my knot tying skills while lying in the mud under my trailer. This will be my last Classic Accessories cover.
Do you have a question about this RV Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.